射频/有线电视测试



产品列表

DI-1000MPO

The DI-1000MPO has been designed and optimized for inspecting MTP/MPO multi-fiber connectors. The fiberscope does retain full compatibility with existing DI-1000 series 2 tips making it suitable for both single and multi-fiber applications. The X/Y scanning knobs and manual focus wheel are conveniently located on the microscope body providing simple and efficient handheld control. The fiberscope interfaces with selected VeEX testers, Windows PCs and Mobile devices via USB cable. The host platform equipped with Fiberizer™ software application enables viewing and Pass/Fail analysis.

AT2500-3G

Designed for digital cable TV, OFDM signal analysis for D3.1, Satellite and over-the-air digital TV signal analysis and measurements, VeEX’s new AT2500-3G is the industry’s most complete 3 GHz advanced spectrum analyzer and multi-standards test solution.

CX310

The new CX310 is equipped with a true DOCSIS 3.1 / 32x8 Cable Modem supporting OFDM measurements as well as VeTest throughput capabilities. Comprehensive SLM features include Single Channel, Full System Scan, Tilt and Ingress Scan. These key capabilities are the basis of the Home Installation Process (HIP) Auto test, enabling Home Certification conformance testing.

CX380s-D3.1

The CX380s-D3.1 is a next generation test solution designed for analog and digital cable TV networks with enhanced spectrum anaylsis, digital channel, DOCSIS 3.0/3.1, Sweep, MPEG analysis and Ethernet test capabilities.

CX350s-D3.1

The CX350s-D3.1 is a portable, all-in-one test solution for legacy analog and digital Cable TV networks, supporting SLM, DOCSIS 3.0/3.1, Ethernet, and T1 test capabilities.

CaLan 3010H+

The CaLan 3010H+ Sweep System is designed for prequalification, installation, and maintenance of DOCSIS 3.1 networks. The unit consists of a high performance, 1.8 GHz Transmitter and a low noise, 204 MHz Receiver, capable of sweeping the entire Forward and Return path respectively.

MTTplus

基于经典的MTT测试平台,MTTplus测试平台为当前的测试需求提供了一套灵活多变,功能强大的模块化测试方案,灵活多变的MTTplus使用了新的技术,并提供多样化的测试模块,测试模块涵盖了传统网络技术,先进的接入网(电口和光口),FTTx,城域网,电信级以太网和传输技术.

MTTplus | WiFi Air Expert Module

The MTTplus WiFi Air Expert Module is the most complete and compact tool for WiFi networks discovery, survey, optimization, performance testing and troubleshooting.

VS-500

光纤端面显微镜,VS-500可以通过USB2.0接口连接到VeEX仪表上配合使用,VS-500配备了便捷的单指聚焦旋钮,完整的适配接头套件以及数字图像传感器,显示分辨率可达0.5μm, 同时也提供了清晰的图片浏览和分析功能,各种连接适配头适合业内标准的连接头类型.

RXT-1200

RXT是业界最灵活,紧凑,面向未来的手持式测试解决方案,适用于核心、城域、接入、光纤应用。前瞻性的RXT-1200™平台解决了通信服务商面临的挑战,以提高效率和生产力.

RXT-1200 | DWDM OTDR测试模块

RXT-4111测试模块是基于VeEX® RXT-1200 模块化测试平台开发的可调DWDM OTDR测试工具,可以为光复用/解复用设备提供通道测试以及端到端的连接性能测试,可以通过单一设备来验证多业务DWDM网络并确保最优质便捷的测试方案.

RXT-1200 | CWDM OTDR测试模块

RXT-4112测试模块是基于VeEX® RXT-1200 模块化测试平台开发的可调CWDM OTDR测试工具,可以为光复用/解复用设备提供通道测试以及端到端的连接性能测试,可以通过单一设备来验证多业务CWDM网络并确保最优质便捷的测试方案.

RXT-1200 | OSA光谱测试模块

RXT-4500/4510 光谱分析模块主要用于CWDM和DWDM网络的光谱和高级通道分析.采用最先进的微光设计和MEMS调谐技术,UX400 OSA模块可以测试所有核心光指标,且操作非常便捷,精准. 高可靠性且坚固耐用的工业设计,不需要移动部件,也无需校准.

RXT-1200 | Cable Expert Module

Designed for the MSO Super-Tech, the RXT-8000 Module provides an abundance of test features addressing RF, DOCSIS, MPEG, and Ethernet applications. Additionally, the RXT-1200 platform provides access to a 100G Carrier Ethernet Test Module, as well as Optical Test tools including an OTDR,OSA, and Fiber Inspection scope.

CX150-D3+ (red)

设计紧凑的手持式 CX150-D3+网络测试仪支持丰富的SLM测试,且内置了DOCSIS 3.0 Cable Modem,同时支持8x4通道绑定.

CX100+

下一代CATV网络安装测试仪提供模拟和数字信号视频的测量和分析.

CX40

掌上型TDR是同轴和配对双绞线测试的理想工具.

CX10/CX10+

CX10/CX10+是一款掌上型电缆长度测试仪,主要利用了时域反射(TDR)原理技术对电力和电信电缆长度进行测量.

CM3000/CM3800

CM3000和CM3800可以为企业和捆绑服务提供上下行网络性能的分析 .两种仪表都可以支持DOCSIS 3.0服务进行测试认证.

DI-1000

光纤端面显微镜,DI-1000可以通过USB2.0接口连接到VeEX仪表上配合使用,DI-1000配备了便捷的单指聚焦旋钮,完整的适配接头套件以及数字图像传感器,显示分辨率可达0.5 μm.